Mineral Water Juice Gas Bevarage Filling And Sealing Machine /
Liquid Filling Machine
Products Introduction
This Full Automatic Plastic Bottle Water Filling Machine used to
produce polyester bottled mineral water, purified water, alcoholic
beverage machinery and other non-gas beverage machinery.Beverage
Machinery can finish all the process such as washing bottle,
filling and sealing, it can reduce the materials and Outsiders
touch time, improve the sanitary conditions, production capacity
and economic efficiency.
Characteristics
1. Using the wind sent access and move wheel in the bottle directly
connected technology; canceled screw and conveyor chains, this
enable the change the bottle-shaped become easier.
2. Bottles transmission adopt clip bottleneck technology,
bottle-shaped transform not need to adjust the equipment level,
only change related the curved plate, wheel and nylon parts is
enough.
3. The specially designed stainless steel bottle washing machine
clip is solid and durable, no touch with the screw location of
bottle mouth to avoid secondary pollution.
4. High-speed large gravity flow valve filling valve, filling fast,
filling accurate and no liquid lose.
5. Spiraling decline when output bottle, transform bottle shape no
need to adjust the height of conveyor chains.
6. Host adopt advanced PLC automatic control technology, the key
electrical components from famous company such as Japan's
Mitsubishi, France Schneider, OMRON.
Technical Parameters
| Model | CGF16-12-6 | CGF18-18-6 | CGF24-24-8 | CGF32-32-10 | CGF40-40-12 |
| Production capacity(500ml) | 2000-4000 | 4000-6000 | 6000-8000 | 12000-15000 | 16000-18000 |
| Filling precision | ≤±5mm(liquid level) |
| Polyester bottle standard(mm) | Bottle neck40-80 | Bottle neck: 50-100 bottle height:150-320 |
| Suitable cap shape | Plastic screw cap | | | | |
| Water pressure of washing bollte(MPa) | 0.18-0.25 |
| Water consumption for water bottle(kg/h) | 800 | 1600 | 2500 | 3000 | 1000 |
| Spraying positon | 5 | 5 | 6 | 12 | 5 |
| Dripping bottle position | 3 | 3 | 3.5 | 7 | 8 |
| Gas source pressure | normal pressure |
| Gas consumption (m3/min) | 0.3 | 0.3 | 0.4 | 0.5 | 0.6 |
| Total power(kw) | 4.23 | 5.03 | 6.57 | 8.63 | 9.63 |
| Total weight | 2000 | 3500 | 5500 | 6000 | 8000 |
| Dimension(L*W*H) (mm) | 2100*1500*2200 | 2450*1800*2200 | 2750*2180*2200 | 3500*2200*2250 | 3500*2200*2250 |
Machine details
Washing part of water bottle filling machine
a) Rotary pan is made of stainless steel 304(or change to 316
according to your request).
b) The rubber clamp splice sizes the mouth of bottles, which is
fixedness and reliable.
Filling part of water bottle filling machine
a) Rotary pan is made of stainless steel 304 (or change to 316
according to your request )
b) The way of filling is gravitation filling.
c) The filling valve is adopted best stainless steel 304 (or change
to 316 according to your request )
d) The structure of filling valve is reasonable, the amount is
correct
e) When filling the bottle, the bottle is move but the valve is
stationary. The splint of bottle-neck seizes mouth of bottles. The
elevator device with the action of gear realize the up and down of
bottle
Capping part of water bottle filling machine
Capping machine is one of the highest precision machines, which
greatly affects the reliability of device and the defective rate of
product. The characteristic is as follows:
a) The dropping cap guide track fixes the device which can protect
the cap from turning over and also set the device which can take
out the inverse cap, equip a photo electricity switch which can
stop the machine when lacking the cap and also avoid the situation
that there is bottle without cap.
b) The bottle inlet switch which is set in the capping machine,
with the locking cap which is the connection of the dripping cap
guide track and dialing cap pan controls the discharging of cap,
making sure that stop conveyor cap when there is no bottles ,avoid
the waste of cap.
Related Products
1.water treatment plants in our workshop
2.packaging system plants in our workshop
Packaging&Shipping
Company Information
Zhangjiagang Jiayuan Machinery Co.,Ltd is a professional beverage machinery manufacturer, we dedicate
ourselves to provide you the best machine with best price.
We can provide beverage production line as below:
1.Complete minereal/pure water production line;
2. Complete carbonated beverage production line;
3. Complete juice production line;
4. 5 gallons water production line;
5.Canning beverage production line;
6.Glass bottle beer production line;
7. Milk/tea filling&package line;
8. Oil filling&package line;
Contact Information
Jessie Ding
Skype:kiraliko
Wechat:188 6220 1209
Mobile Phone:+86 188 6220 1209
Email:jysales3@zjgjyjx.cn
kiraliko@163.com
If you are interested in the product, you are highly welcome to
send me emails for more specifications and videos!~ Looking forward
to your inquiry.
