Carbonated beverage rising filling capping 3 in 1 machine
Features:
1. This DCGF Wash-filling-capping 3-in-1unit:
2. Beverage Machinery is used to produce Gas beverage (CSD)
3. The DCGF Wash-filling-capping 3-in-1unit:Beverage Machinery can
finish all the process such as press bottle, filling and sealing,
4. it can reduce the materials and Outsiders touch time, improve
the sanitary conditions, production capacity and economic
efficiency.
characteristics:
1). Compact structured, good-looking, easy to operate and highly
automated.
2). Air conveyor is directly linked with feed-in starwheels, making
it easier to change bottles without screws and conveyor chains.
3). Bottles are transferred in the manner of clamping neck. Bottles
can be changed through some replacement of steel clamps, which
instead of adjusting the height of machine.
4). Rinser-clamp which special design is strong and endurable, no
contact with bottle-mouth, to prevent pollution.
5). Highly effective spraying nozzles equipped on the rinser-clamp
can rinse every side of inner bottle and save water.
6). Accessories which contact with material are all made of
stainless steel, no dead angles and easy to clean up.
7). Replacement between CO2 and O2 ensure almost no O2 in bottle,
long filling pipe reduce O2 content to null
8). Valve on-off system is driven by hydraulic cylinder, which
starts on bottle signals.
9). High-speed and highly accurate bottling valves ensure no loss
of liquid at high speed.
10). Equipped with CIP clean-in-place.
Technical parameter
| odel | DCGF 16-12-6 | DCGF 18-18-6 | DCGF 24-24-8 | DCGF 32-32-10 | DCGF 40-40-12 | DCGF 50-50-15 |
| Washing No | 16 | 18 | 24 | 32 | 40 | 50 |
| Filling No | 12 | 18 | 24 | 32 | 40 | 50 |
| Capping No | 6 | 6 | 8 | 10 | 12 | 15 |
| Production Capacity(500ml) | 3000BPH | 5000BPH | 8000BPH | 12000 BPH | 15000 BPH | 18000 BPH |
| Install Capacity(KW) | 3.5 | 4 | 4.8 | 7.6 | 8.3 | 9.6 |
| Overall size | 2450×1800×2400 | 2650×1900×2400 | 2900×2100×2400 | 4100×2400×2400 | 4550×2650×2400 | 5450×3210×2400 |
Machine pictures
inner look
Rinser
-Rotative rinsing turret one treatment, fixed nozzles, with
grippers.
-The grippers take the bottles from the inlet star-wheel while they
are still driven by the star-wheel, thus guaranteeing a safe grip.
-After the gripping, the bottle is turned upside down and cantred
above a spraying nozzle which directs a stream of rinse water into
the bottle. After the draining period the bottle is turned over to
an upright position again.
Filler
-The star-wheels drive the bottles always "by the neck" through the
rinsing, filling and capping steps. For the various types of
bottle, it is easy to adjust the structure for the operator by our
specialized design.
-Product bowl is to reduce the loss of heat.
-If the temperature is low than the setting value, the filling
valves will stop and return the last beverage in filling valve to
recycle tank and return to UHT again to sterilize with pump.
Capper
-Rotative capping turret, suitable to the application of screw
plastic caps on PET bottles
-The fixed part consists of the cap hopper, the cap feeder with
relevant motor and the cam actuating the capping heads.
-The heads are raised and lowered by the action of a follower that
is riding on a shaped cam.
electrical system
final products
about our company
our main production lines:
1. bottling minereal/pure water production line;
2. barrel mineral/ pure water production line
3. bottling carbonated beverage production line (like coca cola);
4. bottling juice production line;
5. canning beverage production line;
6. glass bottle beer production line;
7. milk/tea filling&package line;
8. oil filling&package line;
our two workshops
certificate
